Question 71: AC fundamentals

Question

In an ac circuit, the instantaneous current is zero, when the instantaneous voltage is maximum. In this case, the source may be connected to :
A. pure inductor.
B. pure capacitor.
C. pure resistor.
D. combination of an inductor and capacitor.
Choose the correct answer from the options given below :

Accepted Answer

To understand which answer is correct, we must consider the relationship between voltage and current in various types of circuits, namely circuits with pure inductors, pure capacitors, pure resistors, and a combination of inductors and capacitors (LC circuits).
In a
purely resistive
circuit, the voltage and current are in phase, meaning when the voltage is maximum, the current is also maximum. Therefore, option C (pure resistor) cannot result in the instantaneous current being zero when the instantaneous voltage is maximum.
In a
purely inductive
circuit, the current lags the voltage by $90^\circ$, or in other words, when the voltage is at its maximum, the current is zero. This is because the inductor opposes changes in current, leading to this phase difference.
In a
purely capacitive
circuit, the current leads the voltage by $90^\circ$. This means when the voltage is at its maximum value, the current through the capacitor is zero because the current reaches its maximum or minimum before the voltage does.
In an
LC circuit
(inductor-capacitor), under certain conditions like at its resonant frequency, the circuit behaves as if it is purely resistive in nature where voltage and current are in phase. However, it's more nuanced because the question likely implies a condition not at resonance but rather at a general characteristic of LC circuits. In LC circuits, aside from the resonance condition, the presence of both inductive and capacitive components can lead to scenarios where the inductive and capacitive reactances cancel each other, particularly in the case where oscillations are involved, and indeed, there can be moments when the voltage is maximum and the current is minimum (zero in the ideal case) due to the energy being alternately stored in the magnetic field of the inductor and the electric field of the capacitor.
Thus, reflecting on the scenarios:
Pure inductor - Fits the description: instantaneous current is zero when the instantaneous voltage is maximum.
Pure capacitor - Also fits the description for the reason described, taking into account ideal conditions.
Pure resistor - Does not fit as voltage and current are in phase.
Combination of an inductor and capacitor (LC circuit) - Can fit the description under certain non-resonance conditions where the behavior of energy exchange between L and C at a specific instant can result in the instant current being zero when the voltage is maximum, but this is more complex and dependent on specific conditions unlike the straightforward lag or lead in purely inductive or capacitive circuits.
Therefore, the correct answer is
Option C: A, B, and D only
.

Answer

A, B and C only

Answer

A and B only

Answer

A, B and D only

Answer

B, C and D only

AC fundamentals

In an ac circuit, the instantaneous current is zero, when the instantaneous voltage is maximum. In this case, the source may be connected to : A. pure inductor. B. pure capacitor. C. pure resistor. D. combination of an inductor and capacitor. Choose the correct answer from the options given below :

Choose the correct answer: